|
|
Two-component epoxy adhesive with metal filler for reliable bonding and sealing of various metals and other materials; sealing of improperly drilled holes, damaged edges, cracks, etc. Easily sandable and re-paintable. Resists temperatures up to +120 °C.
Properties
- Mixing ratio: 1:1 (by volume and weight)
- Viscosity (after mixing): 20000–25000 mPa.s
- Working time (to gelation): ca. 4–6 min (20 °C to 25 °C)
- Glued parts can be handled: after 10–12 min
- Half strength: after 10–12 min
- Full strength: after 2–3 h
- Full cure: 16–24 h
- Density: 1.3 g/cm³
- Shear strength: 14–18 N/mm²
- Temperature resistance of bonded joint: -40 °C to +120 °C
Removing of excess uncured adhesive: cloth or paper towel moistened with denatured alcohol.
For use as an adhesive sealant: optimum gap width between glued parts 0.1-0.2 mm.
Suitable for bonding: metals, wood, plywood, ceramics, porcelain, glass and carbon laminates.
Not suitable for bonding: soft and flexible plastics (incl. EPP and EPO), polyethylene, Teflon.
Storing: in a tightly closed container, in a cool, dry and dark place (at a temperature of 10 °C to 25 °C). Do not expose to temperatures below 10 °C. Take care not to confuse the resin and hardener caps - even a small amount of hardener can degrade large quantities of resin.
Shelf life: under proper storage conditions, we guarantee a shelf life of 1 year while maintaining the above product properties
The product contains substances classified as dangerous within the meaning of Regulation (EC) No. 1272/2008. See the "Downloads" section for details.
Safety information
The product contains substances classified as dangerous within the meaning of Regulation (EC) No. 1272/2008.
Resin
Warning
Contains: bis-[4-(2,3-epoxipropoxi)phenyl]propane
May cause an allergic skin reaction.
Keep out of reach of children. Wear protective gloves/protective clothing/eye protection. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to by disposing in a hazardous waste receptacle.
Contains epoxy constituents. May produce an allergic reaction.
UFI: 1186-7E6J-DH0P-XDW4
The product contains substances classified as dangerous within the meaning of Regulation (EC) No. 1272/2008.
Hardener
Danger
Contains: 2,4,6-tris(dimethylaminomethyl)phenol, 2,3-Bis[(dimethylamino)methyl]phenol
Causes severe skin burns and eye damage. Causes serious eye damage.
Keep out of reach of children. Wear protective gloves/eye protection. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Store locked up. Dispose of contents to by disposing in a hazardous waste receptacle.
UFI: 89HW-9MQJ-9101-YV2W